Homeowners can actually do the window replacement project by themselves with the proper guidance and if they are confident enough. There are different reasons to consider windows replacement and whatever the reason or who replaces the windows the important factor is good performance and looking good as a bonus. For homeowners who love doing projects themselves, there is always room to learn.
As long as you are able to achieve the desired result at the end of the project, there is nothing to be crucified about doing windows replacement yourself. You need to get well assembled with all the necessities for the project and a set of steps on windows replacement for a successful project. Learn more about the Oakville windows replacement process below.
- Types of Replacement Windows
In most cases, the replacement windows are designed to fit an already existing opening. The options of the types of windows available for windows replacement project is limitless and they all come in different sizes and designs.
The basic types of replacement windows are three in number. These are the insert replacements, full frame units, and sash kits.
For the sash units, the new unit gets new movable parts on the frame. The fastening is done on the jambs of the opening and the sash goes in between. For the sash units to work the frame available must be not only level but also square in shape.
The insert installation, it’s all about a full window that has all the required parts and is ready to be installed on an already existing window frame. The glass area will turn out smaller than the previous one since you are working with new jambs.
The full replacement types of windows, it is similar to the insert type of replacement windows only that they have their own frame unlike in inserts. This is the ideal option for Oakville windows replacement if the current window is damaged to a rotten extent.
- Taking Measurements for Replacement
Taking the measurements is the most important step after deciding that window replacement is what you need. It helps ensure that you get the right unit that will correctively fit the existing opening. Ensure you order the right unit to avoid wasting money, and time and getting frustrated if the unit does not fit in as it is required.
The first important measurement is the inside of the window where you extend the tape measure from jamb to jamb in three points and take the smallest measurement. After that proceed to the height where you also take the measurement from top to the bottom, on the left and the right side, and the middle point. You are also required to record the smallest measurement of the three pints as well.
Carefully use the measuring equipment to measure the width, the diagonals, and the squareness of the corners. Remember to measure the slope of the seal using the angle measuring tool as well as any relevant frame measurements depending on the type of replacement windows you are working with.
- Remove the Sash
The sash of the old window is not needed for the Oakville windows replacement process. Before you take any steps on installation ensure you remove the old sash. Note that to assess the sashes you will need to unscrew the wooden stops first.
- Prying Off the Jamb Liners
You can use a flat bar to pry off the jamb liners if they are aluminum or vinyl. If the window is original and not a case of replacement, remember to first remove the wooden stops on the frame. Remember not to impact the interior and exterior casing.
- Prepare the Frame
Get rid of any blistered paint that found its way to the frame by scraping it. Seal any cracks or holes then carefully sand the jambs to get a smooth texture. You can paint the surfaces to make them appear new.
- Prepare for Installation
Ensure you use low pressure to drill any holes that may be required for the installation after pulling out any existing weights on the opening and then caulk the opening.
- Install the Window
Carefully place the window working from the inside and seal it. Once you fasten it to the opening you can consider the window replacement project complete unless you have any other personal steps.